React Health Luna G3

How to access your comfort settings on the AirSense 11:

On your AirSense 11 machine, use the touchscreen to go to My Options to see your current settings. From here, you can personalize your options.

Humidity Level

The humidifier moistens the air and is designed to make your therapy more comfortable. With the Climate Control Auto setting, both temperature and humidity are automatically preset at levels designed for maximum comfort. If you have a ClimateLineAir™ heated tube, all you have to do is plug it in and press Start. Note: ClimateLineAir heated tubing is required to use Climate Control Auto.

You can also manually set the Humidity Level to Off or between 1 and 8, where 1 is the lowest humidity setting and 8 is the highest humidity setting.

If you’re getting a dry nose or mouth, turn up the humidity. If you’re getting any moisture in your mask, turn down the humidity.

How to adjust humidity:

In My Options, select Humidity Level. Scroll and select the desired humidity level.

Ramp Time

Ramp Time is the period during which the pressure increases from a low start airflow pressure to your prescribed treatment pressure. You can set your Ramp Time to Off, from 5 to 45 minutes or Auto. When Ramp Time is set to Auto, the device will detect when you have fallen asleep and then gradually increase to the prescribed treatment pressure.

How to adjust Ramp Time:

In My Options, select Ramp Time and adjust to your preferred setting.

Need more help with your comfort settings? Your medical equipment store can help make any other necessary adjustments. You can also find more information in your machine’s user guide.

A CPAP prescription is required for an AirSense 11. Cost and coverage vary by insurance provider and plan. Once your doctor has provided you with a prescription, contact your insurance provider to learn more about what’s covered under your plan. Then you can find a CPAP equipment store near you or shop online.

The home medical equipment supplier – the store where you picked up your CPAP mask and machine – is responsible for providing you with ongoing clinical support, including answering any questions and helping you resolve any issues that you may be experiencing with your AirSense 11 machine or settings. Getting used to your CPAP therapy can be challenging and there may be different equipment options that will work better for your personal comfort needs, so don’t hesitate to reach out!

Not sure who your medical equipment supplier is? We can help. Fill out our Contact Us form or call us at (209) 232-7231.

You should clean your machine weekly. The following can be used as guidance for cleaning your machine; full cleaning instructions can also be found in the machine’s user guide.

How to clean your CPAP machine

Time it takes: 5 minutes

Supplies you’ll need to clean your machine:

1. Sink or tub
2. Warm, drinking-quality water (86°F / 30°C)
3. Mild soap
4. Clean towel

Weekly step-by-step cleaning tips:

1. Unplug the machine. Wash the water tub and air tubing in warm water using mild detergent. Do not wash in a dishwasher or washing machine.
2. Rinse the water tub and air tubing thoroughly and allow to dry out of direct sunlight and/or heat.
3. Wipe the exterior of the device with a dry cloth or towel.

ResMed has observed that prolonged and repeated use of an ozone device may eventually cause internal damage to a ResMed machine, leading to an increase in motor noise. The ResMed limited warranty excludes damage to ResMed machines caused by use of ozone devices.

It’s important to regularly inspect, clean and replace your CPAP supplies, which can be affected by dirt and general wear. You should regularly check the water tub, air tubing and air filter for any signs of wear or damage.

Here are some replacement tips for your CPAP parts:

1. Water tub:

• Replace if it begins leaking or has become cracked, cloudy or pitted.
• Replace if the seal is cracked or torn.
• Remove any white powder deposits using a solution of one part household vinegar to 10 parts water.

2. Air tubing:

• Replace if there are any holes, tears or cracks.

3. Air filter:

• CPAP air filters can wear out or become clogged over time, potentially exposing you to airborne particles, mold and bacteria. We recommend checking them twice per month.

For help with when and how to replace your machine parts, contact your CPAP equipment store and ask if they have a replacement supply (resupply) program so you can get new parts on a consistent schedule. You should also check with your insurance provider to see what replacement parts are covered under your plan and how often you can replace them.

While ResMed masks are designed to be compatible with most ResMed machines, it’s best to confirm compatibility for your specific mask to determine the correct mask setting for your machine.

Here’s a list of recommended compatible masks:

Full face masks:

• AirFit™ F30i
• AirFit F30
• AirFit F20
• AirTouch™ F20

Nasal masks:

• AirFit N30i
• AirFit N30
• AirFit N20

Nasal pillow masks:

• AirFit N30
• AirFit N30i
• AirFit N20

Click here for the most up-to-date list of compatible masks.

Yes! Exclusive to AirSense 11 and the myAir app, Personal Therapy Assistant provides interactive voice-guided video setup instructions, as well as Test Drive, a therapy acclimation tool that can help you get comfortable using your AirSense 11 machine. myAir also provides tailored coaching, helpful tips, encouraging messages, cleaning reminders and more to support you along your sleep therapy journey.

Make sure that Bluetooth® is enabled on your smartphone and then log in to the myAir app and follow the prompts to connect to the AirSense 11 machine. If you don’t see the four-digit key on the AirSense 11 screen, go to the Home menu and tap +More, and then tap myAir.